基本情報
出展製品・サービス
SAE 100R7およびSAE 100R8ポリウレタンホース
SAE 100R7 and SAE 100R8 polyurethane hoses
推奨使用範囲:石油、水基、合成油圧油媒体。車載昇降台、潤滑油管、破裂予防制御管路、油圧昇降機と農業用及び建築用機械設備に適用する。オレンジ色C 7 SNCDLはSAE 100 R 7の非導電性要件を満たしている。C 7 SDLとS 7 SNDLの両方のホースはSAE 100 R 7の性能要件を満たしているか、超えており、曲げ半径は非常に小さい。
ホース内管:100%シームレスナイロン*、リン酸エステルとエチレングリコールを含む多種の油圧液体に適応する。
補強層:単層ポリマー編み補強層。
ホース表皮:黒色またはオレンジ色のポリウレタン*、耐油圧油、耐高温、耐老化、耐風化。オレンジ色C 7 SNCDLは非導電性の応用要件を満たすために穿孔されていない。SAE 100 R 7コンダクタンス試験に適合する。75キロボルト/フィートでは、5分間の最大漏電は50マイクロアンペアを超えないようにしてください。(オレンジ色は工業的に認められた非導電性ホースの色である。)ブラックC 7 SDL穿孔は、一般的な油圧及び空気圧の場合に用いられる。
温度範囲:-65°Fから+200°F(-54℃〜+93℃)。石油と合成油の連続輸送の場合。水、水/油エマルジョン及び水−エチレングリコール管の最高温度は+158℉(+70℃)である。
Recommended application range: Petroleum, water-based, and synthetic hydraulic oil media. Suitable for vehicle mounted lifting platforms, lubricating oil pipes, burst prevention control pipelines, hydraulic elevators, and agricultural and construction machinery and equipment. The orange C7SNCDL meets the non-conductive requirements of SAE100 R7. Both C7SDL and S7SNDL hoses meet or exceed the performance requirements of SAE 100R7, and have much smaller bending radii.
Hose inner tube: 100% seamless nylon *, suitable for various hydraulic fluids, including phosphate esters and ethylene glycol.
Enhancement layer: A single-layer polymer woven reinforcement layer.
Hose skin: Black or orange polyurethane *, resistant to hydraulic oil, high temperature, aging, and weathering. Orange C7SNCDL without perforations to meet non-conductive application requirements. Compliant with SAE100R7 conductivity test. At 75 kV/ft, the maximum leakage for 5 minutes should not exceed 50 microamperes. Orange is an industrially recognized non-conductive hose color. Black C7SDL perforated, used in general hydraulic and pneumatic applications.
Temperature range: -65 ℉ to+200 ℉ (-54 ℃ to+93 ℃). Continuous transportation of petroleum and synthetic oil. The maximum temperature of water, water/oil lotion and water glycol tube is+158 ℉ (+70 ℃).