建設現場・工場・物流倉庫など、あらゆる作業現場で発生する「人と車両・重機の接触事故」を未然に防ぐために開発されたのが、INBYTEのQシリーズです。

ドライブレコーダーが「事故後の記録・証拠保全」を目的とするのに対し、Qシリーズは「事故が起きる前に止める」予防型システムです。独自のディープラーニングにより、立姿勢・しゃがみ姿勢を問わず「人だけ」をリアルタイムで高精度検出。接近を検知すると約90dBブザーと7インチモニター警告でオペレーターに即報し、車両停止と組み合わせることで接触事故そのものを防ぎます。

ラインナップは1カメラのQ5（後方対応）、2カメラのQ4、4カメラのQ7（360°対応）の3モデル。死角の多い車両にはカメラ増設も可能で、現場規模や車種を問わず最適構成を実現します。オールインワン設計で専門知識不要、既存車両への後付けも容易です。

ICタグ・超音波センサーなど従来システムはタグ未装着の作業員を検知できない課題がありましたが、Qシリーズはカメラ映像のAI解析で誰でも検知。カメラIP68・本体IP65の防水防塵性能で悪天候・粉塵環境にも対応します。録画機能搭載機種では、ヒヤリハット映像の共有や危険箇所マッピングなど安全教育・安全活動にも活用できます。

The INBYTE Q Series was developed to prevent contact accidents between people and vehicles or heavy machinery — hazards that occur across construction sites, factories, warehouses, and all kinds of work environments.

Unlike dashboard cameras, which are designed to record footage after an accident occurs, the Q Series is a preventive system built to stop accidents before they happen. Using a proprietary deep learning algorithm, it detects people in real time with high accuracy — regardless of posture, whether standing or crouching. When a person enters a danger zone, the system immediately alerts the operator via an approximately 90dB buzzer and a 7-inch monitor warning. Combined with vehicle stop protocols, this actively prevents contact accidents from occurring.

The lineup features three models to suit different needs: the Q5 (single camera, rear blind spot coverage), Q4 (dual camera), and Q7 (four cameras, near-360° coverage). Additional cameras can be installed on vehicles with multiple blind spots, ensuring the optimal configuration for any site or vehicle type. The all-in-one design — camera, monitor, and buzzer included — requires no specialized knowledge and can be retrofitted to existing vehicles with ease.

Traditional systems using IC tags or ultrasonic sensors risk missing workers who are not wearing tags. The Q Series uses AI-based image analysis to detect anyone in the camera’s field of view. With an IP68-rated camera and IP65-rated main unit, the system operates reliably even in rain and dusty conditions. On models equipped with recording functionality, footage can be used for sharing near-miss incidents and mapping hazardous areas — supporting broader safety education and site safety initiatives.

建設現場・工場・物流倉庫などで発生する労働災害を未然に防ぐ、INBYTEの産業用AIカメラ安全監視ソリューションです。現場・施設に固定設置することで、危険エリア全体を常時AIが監視します。

M4は、接近禁止エリアへの人の侵入をリアルタイム検知し、警報音・警告灯点灯で周囲全体に危険を即報します。最大4カメラに対応し広範囲を監視、PoE方式でカメラ電源・信号をLANケーブル1本に集約するため設置工事を大幅に簡略化。カメラごとに危険エリアと警報条件を個別設定でき、現場レイアウトに柔軟に対応します。

PROTECT EYEの最大の特長は、AIの学習機能によりアラートトリガーをカスタマイズできる点です（カスタマイズはロット製造対応）。ヘルメット未着用の検知、作業員の転倒検知、禁止エリアへの無断侵入など、現場ごとの安全ルールに合わせてAIが「何を検知するか」を定義できます。検知の瞬間、管理者へ遠隔アラートを即時発報。現場に常駐せずともリアルタイムで安全状況を把握・対応できます。

NG検知後は、アラート発報→現場確認→録画映像で原因特定、という流れでシームレスに対応。蓄積された映像データはヒヤリハット共有や安全教育にも活用できます。

従来の赤外線・電磁センサーは人と物の判別ができず誤報が多発しましたが、INBYTEのAIカメラは「人だけ」を高精度識別し誤報を最小化。学習カスタマイズと組み合わせることで、あらゆる産業現場の安全管理を高度に支援します。

INBYTE’s industrial AI camera solution is designed to prevent workplace accidents before they occur — across construction sites, factories, warehouses, and other industrial environments. Fixed-mounted at the facility or job site, the system keeps AI-powered watch over hazardous areas at all times.

M4 detects unauthorized entry into restricted zones in real time, triggering instant alerts via alarm sounds and warning lights to notify everyone in the vicinity. Supporting up to four cameras for wide-area coverage, M4 uses PoE technology to consolidate both power and signal into a single LAN cable — significantly reducing installation work. Hazardous zones and alert conditions can be configured individually per camera, allowing flexible adaptation to any site layout.

PROTECT EYE stands out for its AI learning capability, which allows alert triggers to be fully customized to match site-specific safety rules (customization available for lot-based production). Triggers can be defined for scenarios such as detecting workers without helmets, identifying falls or collapses, and flagging unauthorized entry into restricted areas — among many others. The moment a trigger condition is met, an immediate remote alert is sent to the site manager, enabling real-time safety monitoring without requiring on-site supervision.

When a violation is detected, the flow is straightforward: alert issued → site inspection → footage review for cause identification. Accumulated recordings can also be used for sharing near-miss incidents and conducting safety training.

Unlike conventional infrared or electromagnetic sensors that cannot distinguish people from objects and frequently generate false alarms, INBYTE’s AI camera identifies people with high precision — minimizing false alerts. Combined with customizable AI learning, the system delivers advanced safety management tailored to the demands of any industrial environment.

「見えない死角」から人も障害物もすべて守る。INBYTEのミリ波レーダー接近警報システムは、大型トラック・バス・建設車両の後方・側方死角に潜むあらゆる危険を先読みし、段階的な警報でドライバーに即時通知する接近警報システムです。

本製品最大の特徴は、天候・環境に一切左右されない安定した検知性能です。 カメラは逆光・夜間・悪天候で精度が低下し、赤外線センサーは雨・霧・太陽光の乱反射に弱く、超音波センサーは強風・気温変化・遠距離検知に限界があります。ミリ波レーダーは電磁波による測距のため、ゲリラ豪雨・濃霧・粉塵が舞う過酷な建設現場でも検知性能をほぼ落とさず稼働。人だけでなく、他車両・障害物・構造物など死角内のあらゆる物体を検知します。

人身事故・車両損傷・器物損壊の防止はもちろん、ドライバーの心理的負担を軽減し作業効率が向上。万一の事故による工事中断・稼働停止リスクを回避し、企業の労災・賠償リスク低減にも直結します。

防水防塵IP69K（高圧洗浄機対応）・15G耐振動設計で長期安定稼働。検知モードは3段階から選択可能で、車庫内の低速作業から路肩の広域監視まで柔軟に対応します。後付け容易な設計で既存車両に即時導入でき、RC-06C-ALLはレーダー＋カメラ＋モニターを一体化した統合モデルです。

Detecting every hidden danger before it becomes an accident. INBYTE’s millimeter-wave radar proximity warning system continuously monitors the rear and side blind spots of large trucks, buses, and construction vehicles — alerting drivers instantly with staged warnings whenever people, other vehicles, obstacles, or structures are detected.

The system’s greatest strength is its stable detection performance, entirely unaffected by weather or environmental conditions. Camera-based systems lose accuracy in backlit, nighttime, or adverse weather conditions. Infrared sensors are vulnerable to rain, fog, and solar reflections. Ultrasonic sensors struggle with strong winds, temperature changes, and long-range detection. Millimeter-wave radar uses electromagnetic wave measurement, maintaining consistent detection performance even in torrential rain, heavy fog, and dust-filled construction environments — detecting not just people, but any object within the blind spot.

The user benefits are clear. Beyond preventing accidents involving people and vehicle damage, the system reduces driver stress and improves operational efficiency. It also minimizes the risk of work stoppages caused by accidents, directly reducing companies’ exposure to labor accident liability and compensation claims.

Built to withstand the harshest conditions with an IP69K rating (high-pressure wash resistant) and 15G vibration resistance, the system ensures long-term reliability on any job site. Three selectable detection modes cover everything from low-speed yard maneuvering to wide-area roadside monitoring. Easy retrofitting allows immediate installation on existing vehicles, and the RC-06C-ALL integrates radar, camera, and monitor into a single all-in-one unit.